Important Safety Instructions - Makita EB7660TH Instruction Manual

IMPORTANT SAFETY
INSTRUCTIONS
General instructions
1. To ensure correct and safe operation, the user must read,
understand and follow this instruction manual to assure
familiarity with the handling of the blower. Users insuffi-
ciently informed will risk danger to themselves as well as
others due to improper handling.
2. It is recommended only to lend the blower to people who
have proven to be experienced with blowers.
3. Always hand over the instruction manual when lending the blower.
4. First-time users should ask the dealer for basic instructions
to familiarize oneself with the handling of a blower.
Children and young persons aged under 18 years must not be
5.
allowed to operate the blower. Persons over the age of 16 years
may however use the tool for the purpose of being trained only
while under the direct supervision of a qualified trainer.
6. Use blowers with the utmost care and attention.
7. Operate the blower only if you are in good physical
condition.
8. Perform all work conscientiously and carefully. The user has
to accept responsibility for others.
Never use the blower while under the influence of alcohol or
9.
drugs.
10. Do not use the unit when you are tired.
11. Save these instructions for future reference.
12. Observe and follow all relevant accident prevention instruc-
tions issued by the trade associations and by insurance
companies. Do not perform any modifications to the blower
as this will risk your safety.
13. Never make modification on the equipment. It may cause
dangerous accidents or personal injury.
Personal protective equipment
The clothing worn should be functional and appropriate, i.
1.
e., it should be tight fitting but not cause a hindrance. Do
not wear jewelry, clothing or long hair which could be drawn
into the air intake.
2. In order to avoid head-, eye-, hand- or foot injuries as well as
to protect your hearing the following protective equipment
and protective clothing must be used during operation of
the blower.
Clothing must be sturdy and snug-fitting, but allow com-
3.
plete freedom of movement. Avoid loose-fitting jackets,
flared or cuffed pants, scarves, unconfined long hair or any-
thing that could be drawn into the air intake. Wear overalls
or long pants to protect your legs. Do not wear shorts.
4. Generally, engine products are noisy and their noise may
damage your hearing. Wear sound barriers (ear plugs or
ear mufflers) to protect your hearing. Continual and regular
users should have their hearing checked regularly.
5. Use of gloves when working with the blower is recom-
mended. Wear sturdy shoes with non-slip soles.
6. Proper eye protection is a must. Even though the discharge
is directed away from the operator, ricochets and bounce-
backs can occur during blower operation.
7. Never operate a blower unless wearing goggles or properly
fitted safety glasses with adequate top and side protection
which comply with ANSI Z87.1 and regulations in your
country.
8. To reduce the risk of injury associated with the inhalation of
dust, use face filter mask in dusty conditions.
Intended use
The tool is intended for blowing dust.
Starting up the blower
1. Clear the area of children, bystanders, and pets. At a mini-
mum, keep all children, bystanders, and pets outside a 15
m (50 ft) radius; outside the 15 m (50 ft) zone, there is still
a risk of injury from thrown objects. Bystanders should be
encouraged to wear eye protection. If you are approached,
stop the engine.
2. Before operating, always check that the blower is safe for
operation:
— Check the security of the throttle lever. The throttle
lever should be checked for smooth and easy action.
— Check for proper functioning of the throttle lever lock.
— Check for clean and dry handles and test the function of
the l-O switch. Keep handles free of oil and fuel.
3. Start the Blower only in accordance with the instructions.
Do not use any other methods for starting the engine.
4. Use the blower and the tools supplied only for applications
specified.
5. Start the blower engine only after the entire tool has been
assembled. Operation of the tool is permitted only after all
the appropriate accessories are attached.
3 ENGLISH