Phonebook - Panasonic KX-HNH100C Operating Instructions Manual

Phonebook

Phonebook
You can add 500 names (16 characters max.)
and phone numbers (24 digits max.) to the
phonebook, and assign each phonebook entry
to the desired group.
Important:
R All entries can be shared by any registered
handset.
R You can copy contacts from your mobile
device to the unit's phonebook if your
mobile device is registered to the hub.
If you store phone numbers in your mobile
device's contacts using the international
dialing symbol "+" and the country code, we
recommend that you store phone number
conversion codes in the hub. For more
information, refer to the User's Guide
(page 42).
Adding phonebook entries
1
MWN or MFN W a MMENUN
2
MbN: "Add new entry" a MSELECTN
3
Enter the party's name. a MOKN
R For information about entering
characters, see "Character table",
page 44.
4
Enter the party's phone number. a MOKN
5
MbN: Select the desired group. a
MSELECTN 2 times a MOFFN
Storing a redial list number to the
phonebook
Phone numbers of up to 24 digits can be
stored in the phonebook.
1
MEN REDIAL
2
MbN: Select the desired phone number.
a MSAVEN
3
To store the name, continue from step 3,
"Editing entries", page 21.
For assistance, visit www.panasonic.ca/english/support
20
HNH100C_(en_en)_0130_ver.202.pdf
Storing caller information to the
phonebook
1
MCN CID
2
MbN: Select the desired entry.
R To edit the number: MMENUN a MbN:
3
MMENUN
4
MbN: "Save CID" a MSELECTN
5
MbN: "Phonebook" a MSELECTN
6
Continue from step 3, "Editing entries",
page 21.
Groups
Groups can help you find entries in the
phonebook quickly and easily. You can
change the names of groups assigned for
phonebook entries ("Friends", "Family", etc.).
By assigning different ringer tones for different
groups of callers, you can identify who is
calling (ringer ID), if you have subscribed to
Caller ID service.
Changing group names/setting ringer
ID
The default group name is "Group 1" to
"Group 9".
1
MWN or MFN W a MMENUN
2
MbN: "Group" a MSELECTN
3
MbN: Select the desired group. a
MSELECTN
4
To change group names
MbN: "Group name" a MSELECTN a
Edit the name (10 characters max.). a
MSAVEN
To set group ringer tone
MbN: Select the current setting of the
group ringer tone. a MSELECTN a MbN:
Select the desired ringer tone. a MSAVEN
5
MOFFN
20
"Edit" a MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the desired
format. And then, press MSAVEN. Go to
step 5.
2017/01/30 16:12:23