Table of Contents
Advertisement
* 2 : For short voltage supply during MENU OFF, executes ONEAF and for
* 3 : For more than 2 second long voltage supply, moves to the PRESET
7. 5V OUT
Power supply jack for RS-485 JIG. Use within typical DC +5V 100mA.
8. DAY/NIGHT IN
This is a function to receive the external DAY/NIGHT signal from the
sensor(option) and convert the signal into BW.
9. RS-485 DATA-
Jack for connection to RS-485 DATA- signal line.
10. RS-485 DATA+
Jack for connection to RS-485 DATA+ signal line.
SETUP Switch
This switch is used to set the function or property. When this switch is pressed
for at least 2 seconds, the MAIN MENU appears.
(Left/Right) : By pressing this switch left or right, you can move left or right
(Up/Down) : By pressing this switch up or down, you can move up or down on
: When you press this switch in the menu, the selected function is confirmed.
video OUT Port
This is connected to the Video Input Port of the monitor and it outputs the
Video signals.
GND
This is a grounding port.
Power Connection Port
This is connected to the Power cable.
Power Display LED
When the power is normally connected, the red LED lights.
ENGLISH.indd 11
more than 2 second
0(HOME) position.
on the menu or change the displayed value.
the menu.
To enter a submenu, press this button.
English _11
2009-9-10 13:53:4
Advertisement
Table of Contents
