Table of Contents
Advertisement
Button with LED
Blink frequency
Color
Enclosure
Weight
Connection to sensor (mechanical)
Connection (mechanical)
Enclosure material
Protective type
Warranty
FUNCTIONING
Terminal box shall be provided with 24vdc.
Terminal box supply 24vdc on to WIO sensor.
Terminal box measuring mA from the sensor, and convert it to
value.
WIO sensor delivers mA, digital values and relay status to the terminal
box.
H-Alarm LED is for indication of the High Alarm relay state from the WIO
sensor. When the alarm condition is generated by the WIO sensor, then
the High Alarm relay is open and the H-Alarm LED flash red ON/OFF
sequence to show the High Alarm state, and the alarm signal buzzer will
be switched ON.
HH-Alarm LED is for indication of the High High Alarm relay state from the
WIO sensor. When the alarm condition is generated by the WIO sensor,
then the High High Alarm relay is open and the HH-Alarm LED flash red
ON/OFF sequence to show the High High Alarm state, and the alarm signal
buzzer will be switched ON.
The H-Alarm LED or HH-Alarm LED will stay in blinking mode until the H-
Alarm or HH-Alarm button is pressed, then the LED constantly turned on.
The alarm signal buzzer will stay on until the H-Alarm or HH-Alarm button
is pressed.
Tel: +45 74 43 71 81 • Fax: +45 74 43 71 91 • CVR: 3459-1229 • www.paj.dk • e-mail: paj@paj.dk
APPROVALS: ISO 9001, ISO 14001, ISO 13485, IEC 61340-51 & IPC-A-610 CLASS 3
PAJ Sensor A/S • Grundtvigs Allé 163 • DK-6400 Sønderborg
03-01-0501-CRJ-04 Side 30 af 53
2 Hz
RED
650 grams
2 x 8-pole connectors, male and female,
M12x1 thread
2 x M20 gland, cable diameter 6 to 12 mm
Aluminum
IP66
2 years
or PPM
a
w
Advertisement
Table of Contents
