Painless Performance Products 50201 Installation Instructions

INSTALLATION INSTRUCTIONS

MOUNT THE SWITCH PANEL IN THE DESIRED LOCATION BY DRILLING
HOLES IN THE DASH TO SUIT YOUR NEEDS. FOUR (4) SCREWS ARE PROVIDED.
(WHEN USING THE
INSERT THE TERMINATED WIRES INTO THE PLASTIC HOUSING
PROVIDED ACCORDING TO ILLUSTRATION BELOW. USE THE MATING
TERMINAL AND HOUSINGS TO CONNECT THE PANEL TO THE MAIN HARNESS.
THE FOLLOWING INDEX IS A LIST OF WHAT EACH COLOR WIRE IS USED FOR.
RED (12 GA)
BLACK (12 GA)
BLUE/YELLOW (14 GA)
BLUE (14 GA)
PINK (14 GA)
PURPLE (14 GA)
YELLOW/WHITE (14 GA)
BROWN (14 GA)
GREEN (14 GA)
GRAY/WHITE (14 GA)
ORANGE (14 GA)
BROWN (18 GA)
50201
IN DASH SWITCH PANEL
50001 AND 50002 SYSTEMS ONLY)
817-244-6212 Phone • 817-244-4024 Fax
888-350-6588 Sales • 800-423-9696
E
Tech -mail:painless@painlessperformance.com
Web: www.painlessperformance.com
SWITCH PANEL POWER INPUT WIRE
GROUND
TO HEADLIGHT OR DIMMER SWITCH
TO ELECTRICAL WATER PUMP
IGNITION (TO COIL)
START (STARTER SOLENOID)
TO ELECTRIC FUEL PUMP #1
TO TAIL LIGHTS
TO ELECTRIC FUEL PUMP #2
TO ELECTIRC FAN
TO ACCESSORY
TO FUSE BLOCK RELAY (USED W/ 50002
ONLY
2501 Ludelle Street
Fort Worth, Texas 76105