G0513X2B & G0513X2BF
Shipping Inventory (Figures 13–14)
A. Bandsaw (not shown) ................................. 1
B. Table ........................................................... 1
C. Miter Gauge ................................................ 1
D. Resaw Fence ............................................. 1
E. Front Rail .................................................... 1
F.
Fence Assembly ......................................... 1
G. Guide Post Handwheel............................... 1
Hardware & Tools (Not Shown)
•
Flat Washers 8mm (Table, Fence, Rail) ..... 8
•
Lock Washers 8mm (Table, Rail) ............... 5
•
Hex Bolts M8-1.25 x 25 (Table) .................. 4
•
Hex Bolt M8-1.25 x 90 (Positive Stop) ........ 1
•
Hex Nut M8-1.25 (Positive Stop) ................ 1
•
Cap Screws M6-1 x 20 (Rail) ..................... 3
•
Cap Screw M8-1.25 x 20 (Rail) .................. 1
•
Lock Washers 6mm (Rail) .......................... 3
•
Flat Washers 6mm (Rail) ............................ 3
•
Table Pin..................................................... 1
•
Table Inserts ............................................... 2
•
Locking Handle M8-1.25 x 44 (Fence) ....... 1
•
Moving Plate (Fence).................................. 1
•
Knobs M8-1.25 x 20 ................................... 2
•
Rail Plates .................................................. 3
•
Hex Wrench 5mm, 8mm.................... 1 Each
•
Open End Wrench 10 x 13mm ................... 1
-20-
Qty
Qty
Figure 13. Table and miter gauge.
Figure 14. Other bandsaw components.
G0513 Series Bandsaws (Mfd. Since 07/18)
B
E
G
C
D
F