Table of Contents
Advertisement
INITIAL USE
EN 12
Setting the time
TIME l HOUR
11
12
13
1. Turn the selection knob and change the hours.
2. Confirm this setting by pressing the right navigation key or by
pressing the selection knob.
3. Turn the selection knob and change the minutes.
4. Confirm this setting by pressing the confirm key.
All the start-up settings are now set and the display will show the
standby screen. The appliance is now ready for use.
The language, time and date can be adjusted in the settings menu (see
'Settings menu' chapter). The settings menu can be opened from the
start display via the 'Plus' menu.
Stand-by display
The standby display will show the time, date and the timer (if set).
The appliance goes to standby mode after:
• Turning the function knob to 0 ('off' position).
• Pressing the stop key multiple times (deeper in the menu).
Off mode
• Default the appliance will shut down after no action for a set time of
30 minutes.
• Press and hold the stop key to shut down the appliance manually.
Switching the appliance on
• Press and hold the stop key to switch on the appliance.
• The appliance can also be switched on by turning the function knob
to a function.
:
03
05
2015
•
•
12 : 00
00
Advertisement
Table of Contents
