Sony MDR-1ADAC Help Manual page 66

Note
The headphones only support the audio playback function of the WALKMAN.
Turn on your WALKMAN before operating the headphones.
Some operations may not be possible with the headphones even if you use a supported WALKMAN.
The following settings of your WALKMAN may be causing sound distortion. Set these settings off to solve the
problem.
Dynamic Normalizer
Equalizer
VPT (Virtualphones Technology)
DSEE (Digital Sound Enhancement Engine)
Speaker output optimizer
Sound is not output from the headphone jack of the WALKMAN when it is connected to the headphones.
You cannot adjust the volume with the WALKMAN when it is connected to the headphones.
The connected WALKMAN will not be charged when it is connected to the headphones.
Related Topic
Connecting to WALKMAN models unsupported by digital-out
Compatible WALKMAN models
4-547-764-11(1)
Copyright 2014 Sony Corporation
Go to Page Top
Go to Page Top
61