Sony MDR-1ADAC Help Manual page 62

Stereo headphones

Hide thumbs Also See for MDR-1ADAC:

Table of Contents

The headphones support USB 2.0 (USB 2.0 High Speed) as an audio device.

Note

If you are listening to music loudly with the headphones connected to a computer, the POWER indicator may flash

in green or the sound may be interrupted. This is not a malfunction. In this case, turn the volume down.

The headphones are not guaranteed to operate via a USB hub or USB cable extension. Use the supplied micro-

USB cable only.

Do not disconnect the computer while operating. Before disconnecting the computer from the headphones, stop

playback and turn the headphones off to prevent damage to data.

Digitally broadcast sound cannot be output from a computer's USB port. In this case, connect the Input jack (stereo

mini) of the headphones to the analog audio output of the computer. For details on connections, see "Connecting to

an analog output device."

Be careful not to trip over the connecting cable.

Table of Contents