Assistance Systems For Parking Or Backing; Assistance Systems For Driving - GMC 2018 Acadia Denali Owner's Manual

234 Driving and Operating
Warning (Continued)
Detect children,
pedestrians, bicyclists,
or animals.
Detect vehicles or objects
outside the area monitored
by the system.
Work at all driving speeds.
Warn you or provide you
with enough time to avoid a
crash.
Work under poor visibility or
bad weather conditions.
Work if the detection sensor
is not cleaned or is covered
by ice, snow, mud, or dirt.
Work if the detection sensor
is covered up, such as with
a sticker, magnet, or metal
plate.
Work if the area surrounding
the detection sensor is
damaged or not properly
repaired.
(Continued)
Warning (Continued)
Complete attention is always
required while driving, and you
should be ready to take action
and apply the brakes and/or steer
the vehicle to avoid crashes.
Audible or Safety Alert Seat
Some driver assistance features
alert the driver of obstacles by
beeping. To change the volume of
the warning chime, see Comfort
and Convenience under Vehicle
Personalization 0 144.
If equipped with the Safety Alert
Seat, the driver seat cushion may
provide a vibrating pulse alert
instead of beeping. To change this,
see Collision/Detection Systems
under Vehicle Personalization
0 144.
Assistance Systems for
Parking or Backing
If equipped, the Rear Vision Camera
(RVC), Rear Parking Assist (RPA),
Front Parking Assist (FPA),
Surround Vision, Front Vision
Camera, and Rear Cross Traffic
Alert (RCTA) may help the driver
park or avoid objects. Always check
around the vehicle when parking or
backing.
Rear Vision Camera (RVC)
When the vehicle is shifted into
R (Reverse), the RVC displays an
image of the area behind the vehicle
in the infotainment display. The
previous screen displays when the
vehicle is shifted out of R (Reverse)
after a short delay. To return to the
previous screen sooner, press any
button on the infotainment display,
shift into P (Park), or reach a vehicle
speed of approximately 12 km/h
(8 mph). Select Front or Rear
Camera on the camera screen to
view the front or rear camera views.
Select Guidance Lines on the
camera screen to enable or disable
the guidance lines.