LVD SCSIDE Bridge Manual
Step 3. Double click "Printers and Other Hardware". Then, double click "System"
on the left. After entering "System Properties", click "Hardware", "Device Man-
ager". Then, double click "SCSI and RAID controllers" to check if AEC-67160
adapter is installed well.
Figure 4-8
2. Check IDE device
If you can find the IDE device connected to AEC-7726H/Q in "Device Manager",
AEC-7726H/Q has been installed successfully. If you cannot find, but see a yellow
question mark, check the IDE connector on AEC-7726H/Q. It could be a bad con-
nection or the device's malfunction. Check your IDE device as follows.
44