Removing the freezer door
A few things to mention first.
• Make sure that you lift the door straight up so the hinges are not bent or broken.
• Be careful not to pinch the water tubing and wire harness on the door.
• Place doors on a protected surface to prevent scratching or damage.
1. With the Freezer door closed, remove the upper hinge cover
screwdriver, and then disconnect the wires by gently pulling them apart
1
2. Remove hinge screws
the upper hinge
6
. Be careful that the door does not fall on you as you are removing it
5
6
3. Next, remove the door from the lower hinge
7
4. Remove the lower hinge
lifting the lower hinge upwards.
Reattaching the freezer doors
To reattach the freezer doors, replace parts in reverse order
2
and the ground screw
4
4
by carefully lifting the door straight up
7
from the bracket
10
by gently
and wire cover
1
.
3
by turning counter-clockwise, and take off
5
Be sure to keep track of all
parts you are removing.
Be careful not to pinch
the water tubing and
wire harness on the
door.
10
using a
2
.
setting up _11