Konka M520 User Manual page 58

network about the current status.
Call Divert: Call Diverting is a
incoming call to be transferred to another phone specified by you. Enter
Call Setting, select Call Divert and press OK to use the function.
−
Divert All Voice Calls: When you activate this function, all
incoming calls will be diverted to the specified number. Select
Activate or Deactivate to connect the phone with the network.
After a while, the network will respond and advise you about the
status of the Call Divert function. .
−
Divert If Unreachable: When you activate this function, the
incoming call will be diverted to the specified number if your
number is not reachable. Select Activate or Deactivate to connect
the phone with the network. After a while, the network will respond
and advise you about the status of the Divert If Unreachable
function.
−
Divert If No Answer: When you activate this function, the
incoming call will be diverted to the specified number if your
phone is not answered within a specified time. Select Activate or
Deactivate to connect the phone with the network. After a while,
the network will respond and advise you about the status of the
Divert If No Answer function.
−
Divert If Busy: When you activate the function, the incoming call
will be diverted to the specified number when your phone is busy.
Select Activate or Deactivate to connect the phone with the
network. After a while, the network will respond and advise you
about the status of the Divert If Busy function.
−
Divert All Data Calls: Support from the network operator is
needed to divert all data calls.
Note on the above-mentioned five divert operations:
−
Activate: Activate it after inputting the divert number.
network service that enables the
- 53 -