Konka M520 User Manual page 57

Greeting Text: Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
Show Date and Time: When set to ON, time and date will be displayed
on the idle frame.
Show Owner Number: When set to ON, the Owner Number will be
displayed on the idle screen (but this does not apply to the Analog
Clock Wallpaper).
Note: The phone number will be displayed only if you have
edited the name or call of the phone number, and line 1 and line
2 are corresponding to the two sets of phone numbers
respectively.
4.4.4 Call Setup
Caller ID: You can select the system presetting provided by the network
operator to hide or send the number. The default setting by the factory
is Set By Network.
Note: This function depends on the network so selecting "Hide ID" may
cause failure to dial. Before using this function, please test it by talking
over the phone to ensure that everything is ok.
Call Waiting:
−
Activate: When you activate this function, the mobile phone will
be connected with the network. After a while, the network will
respond by sending the message to OK your operation. When
Call Waiting is activated, you will receive an alert from the network
if someone calls you while you are attending another call, , and
the phone number of the caller will appear on the screen.
−
Deactivate: If you cancel the Call Waiting function, you will not
receive any alerts from the network if someone calls while you
are attending another call.
−
Query Status: With this function you can make enquiries from the
- 52 -