Getting Started; First Call; Mounting The Sim Card - Konka M520 User Manual

2. GETTING STARTED

2.1 FIRST CALL

Insert a SIM card (first switch off your phone and remove the
battery). Enter the area code and the phone number and press
Pick Up Key.
Note: Before you get started, you must insert a valid SIM card in
your phone and charge the battery first.
SIM Card: for relevant detailed guidance on installation, please
refer to "2.2 Mounting The SIM Card".
Charging the battery: please refer to "Section 2.4 Batteries and
Charging the Battery" for details.

2.2 MOUNTING THE SIM CARD

Your mobile phone number, PIN (Personal Identification Number), PIN2,
PUK (Personal Unlock Key), PUK2 (Personal Unlock Key2) and IMSI
(International Mobile Subscriber Identity) and network information,
phonebook data, SMS (short messages) and other data are stored in
your SIM card.
Note: This particular phone model supports the SIM cards of 1.8V and
3V only.
At present, not all network operators offer PIN2 and PUK2. Due to
this, the functions that need the above passwords in this phone
may be unavailable.
Please handle the SIM card carefully. Scraping or bending the SIM
- 12 -