GE Profile PSB9100EFES Dimensions And Cabinet Installation Information

C L
PSB9100EF
GE Profile Series 27 in. Single Wall Oven with Advantium
™
Suitable
bracing
21-5/8"
to support
ADVANTIUM WALL OVEN/GE PROFILE
over centerline
runners
of cabinet
TOWER DIMENSIONS AND CABINET INSTALLATION
(Must support 130 lbs.)
INFORMATION (IN INCHES)
NOTE: Cabinets
installed adjacent
to wall ovens must
have an adhesion
spec of at least a
194°F temperature
rating.
19-1/8"
NOTE: 2" minimum
between cutouts
when installed
above warming
drawer or single
wall oven.
INSTALLATION
INFORMATION:
Before installing,
consult installation
instructions packed
with product for current
dimensional data.
For answers to your Monogram, GE Café
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
2x4's or
equivalent
solid floor
26-3/4"
SERIES COOKING
™
A=Allow 1" overlap of oven over bottom edge of cutout.
B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.
4-3/16"
Cabinet width
A
B
21-1/2"
To back
of Control
29-3/4"
26-3/4"
A
B
Conduit
(46" long)
Suitable
bracing
to support
runners
™ Series, GE Profile
® Service, 800.626.2000.
Required
cutout location
36-3/4"
minimum
from floor
Technology
®
Advantium Wall Oven Dimensions (in inches)and
Cabinet Installation (in inches)
cabinet
width
Note: Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.
Junction box location (240-volt models only)
C L
2x4's or
3" MIN between cutouts
equivalent
recommended—2" MIN required
solid floor
Construct Solid Bottom
MIN 3/8" Plywood Supported by
2 x 4 or 1 x 2 Runners, all Four Sides.
(Must Support 150 lbs. for Advantium)
(Must Support 200 lbs. for Wall Oven)
21-5/8"
9-1/4" cutout height
over centerline
28-1/2" cutout width
of cabinet
2" MIN between cutouts
(Must support 130 lbs.)
1" Min. above toekick or adjust
to oven installation height
Cabinet width
19-1/8"
21-1/2"
To back
of Control
Suitable
29-3/4"
26-3/4"
bracing
to support
runners
Conduit
(46" long)
™ Series or
Construct Solid
Bottom Min.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
25-1/4"
Cutout width
21-1/2"
To Back of Control
A
Conduit
19-1/8"
(48-1/2"
long)
Advantium Wall Oven Dimensions (in inches)
Cabinet Installation (in inches)
26-3/4" Note: Cabinets installed adjacent
to wall ovens must have an adhesion
spec of at least 194° F temperature rating.
cabinet
width
A=Allow 1" overlap of oven over bottom edge of cutout.
B=Allow 11/16"-3/4" for overlap of oven over side edges of cutout.
C L
4-3/16"
Junction box location
A
B
3" MIN between cutouts
recommended—2" MIN required
21-5/8"
A
over centerline
B
Construct Solid Bottom
of cabinet
MIN 3/8" Plywood Supported by
2 x 4 or 1 x 2 Runners, all Four Sides.
(Must support 130 lbs.)
(Must Support 150 lbs. for Advantium)
(Must Support 200 lbs. for Wall Oven)
9-1/4" cutout height
28-1/2" cutout width
2" MIN between cutouts
4-3/16"
23-1/2"
Cutout depth
Junction box
location
(240-volt
models only)
B
17-1/2"
Cutout height
Construct Solid
Bottom Min.
3/8" Plywood
Required
Supported by
cutout location
2 x 4 or 1 x 2
36-3/4"
Runners, all
minimum
Four Sides.
from floor
(Must Support
21-1/2"
150 lbs.)
To Back of Control
19-1/8"
2x4's or
equivalent
solid floor
26-3/4"
(240-volt models only)
Listed by
Underwriters
Laboratories
A=Allow 1" overlap of oven
B=Allow 11/16"-3/4" for ove
Specification Created 2/16
4-3/16"
2
Cuto
Cond
(48-1
long
ca
w