Kenwood KMM-205 Instruction Manual page 21

INSTALLATION/CONNECTION
Installing the unit (in-dash mounting)
Hook on the top side
Orientate the trim
plate as illustrated
before fitting.
Removing the unit
1 Detach the faceplate.
2 Remove the trim plate.
3 Insert the extraction keys deeply into
the slots on each side, then follow the
arrows as shown on the illustration.
Do the required wiring.
(Page 18)
Dashboard of
your car
Bend the appropriate tabs to hold the sleeve
firmly in place.
Connecting external components
Output terminals
When connecting to an external amplifier, connect its ground wire to the
car's chassis to avoid damaging the unit.
Rear/Subwoofer output
Front/Subwoofer output
17
ENGLISH