Fermax 4545 User& Installer's Manual page 30

TELEPHONE INTERFA A A A A CE TELEPHONE INTERF TELEPHONE INTERF
TELEPHONE INTERF TELEPHONE INTERF
TELEPHONE INTERFA A A A A CE TELEPHONE INTERF TELEPHONE INTERF
TELEPHONE INTERF TELEPHONE INTERF
When you access this menu, the audio setting is made during communication with the
panel 1 (it automatically connects upon entering in the menu).
Audio Adjustment Keys :
Parameter
INPUT Audio
OUTPUT Audio
Exit (key: #)
Steps for adjusting audio from the programming menu:
1. Accessing Programming mode: pick up the telephone and before 3 seconds pass,
press # # #, confirming access to programming mode via a confirmation tone: beep-
beep-beep. (If already in this mode this step is not necessary).
2. Press the 9 key, you hear a beep.
3. Enter the desired parameter value:
a) Input Audio (3 / 6), for example: enter «3» twice to increase the input audio, (you
hear: a confirmation beep each time you press the key.
b) Output audio (1 / 4), for example: enter 4 three times to decrease the output audio,
(you hear: a confirmation beep each time you press the key.
4. Press #, you hear beep-beep-beep, return to the configuration menu.
Sequence completed: # # # (beep-beep-beep) 9 (beep) 3 (beep) 3 (beep) 4 (beep) 4
(beep) 4 (beep) # (beep-beep-beep)
Key # - Exit
o
Return to standby, that is, exit the configuration menu.
Page 30
CE CE CE
CE
CE CE CE
CE
Increase Key
3
1
Decrease Key
6
4
+ +
- -