Table of Contents
Advertisement
4
Checking the display screen
Check the display screen and make sure it is shown in the figure below after
you turn the power on. This will indicate if the phone is in good working order.
The availability of power is indicated in three levels.
１０：１０
１０：１０
１０：１０
Ｆｒｉ Ｏｃｔ １０
Ｆｒｉ Ｏｃｔ １０
Ｆｒｉ Ｏｃｔ １０
This display shows radio wave status.
shows the most ideal condition for telephoning.
●Even in main service areas there are places that only receive weak signals. In this
case, you might not hear well or your call may be cut off.
The above battery voltage level figures show remaining
battery strength. Certain charges in conditions may cause
the battery level figures to fluctuate. (See example of figure
right.)
＊ When you use this phone is not Japan, in some places, it could happens that you
cannot use the phone even if you are under the good signal conditions.
5
Set up the handset for first use（→ Page 10）
This is important to protect your confidential data and to prevent malfunction.
Clock setting, call number log setting and other basic settings are made in
order to make a handset perform its date- and time-related functions. In this
way, lock number change, calling history and receiving history can be
registered correctly.
9
10:10
Level 3
full
●
「充電してください」
メインメニュー
appears on the display.
Level 2
medium
when no power is left,
A display of 3 bars
Level 1
low
Advertisement
Table of Contents
