Table of Contents
Advertisement
Quick Links
Please do not return product to retailer.
Por favor, no devuelva el producto al lugar de compra.
Veuillez ne pas retourner le produit au détaillant.
Register your product online at:
Registre su producto en línea en:
Enregistrez votre produit en ligne à l'adresse :
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea el manual de instrucciones y siga todas las advertencias e
instrucciones de seguridad. El no hacerlo puede resultar en
lesiones graves.
AVERTISSEMENT:
Lire le manuel d'instructions et bien respecter tous les avertisse-
ments et toutes les instructions de sécurité. Tout défaut de le faire
pourrait entraîner des blessures graves.
Poulan PRO
9335 Harris Corners Parkway
Charlotte, NC 28269
Rev. 01 10/10/16
1-855-378-6903
www.poulanpro.com
Instruction Manual
Manual de Instrucciones
Manuel d'Instructions
40V 20" Snow Thrower
PPB40SB
Poulan PRO
850 Matheson Blvd. West
Mississauga, Ontario L5V 0B4
Advertisement
Table of Contents
Related Manuals for Poulan Pro PPB40SB
Summary of Contents for Poulan Pro PPB40SB
- Page 1 Instruction Manual Manual de Instrucciones Manuel d’Instructions 40V 20" Snow Thrower PPB40SB WARNING: Read and follow all Safety Rules and Operating Instructions before using this product. Failure to do so can result in serious injury. ADVERTENCIA: Lea el manual de instrucciones y siga todas las advertencias e instrucciones de seguridad.
-
Page 2: Table Of Contents
TABLE OF CONTENTS CONTENTS..........................2 IDENTIFICATION OF SAFETY SYMBOLS................3 SPECIFICATIONS........................4 SAFETY RULES........................5 ASSEMBLY.........................8 OPERATION..........................11 MAINTENANCE........................14 TROUBLESHOOTING......................16 LIMITED WARRANTY......................17 EXPLODED VIEW / PARTS LIST...................18... -
Page 3: Identification Of Safety Symbols
IDENTIFICATION OF SAFETY SYMBOLS Symbol Name Designation/Explanation Volts Voltage Amperes Current Hertz Frequency (cycles per second) Watt Hour Energy Storage Capacity Amp Hour Current Capacity Direct Current Type of current Direct Current Type or a characteristic of current Rotating Speed Revolutions per minute Revolutions, strokes, surface speed, orbits etc., per /min... -
Page 4: Specifications
IDENTIFICATION OF SAFETY SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. -
Page 5: Safety Rules
SAFETY RULES FOLLOW THESE RULES WHILE on the LED lights and be aware of your surroundings. OPERATING THE SNOW THROWER. • To avoid accidental start-ups, remain in IMPORTANT: Read and understand the starting position when turning the all instructions. Failure to follow all instructions snow thrower on. - Page 6 • Always remove battery pack from your batteries may cause injury or damage to the tool when you are assembling parts, snow thrower. Use only with Poulan PRO 40V making adjustments, cleaning, or when batteries (model#: PPB404AH) and Poulan not in use. Removing battery pack will PRO 40V Charger (model#: PPB40CGR).
- Page 7 SAFETY RULES • Always wear eye protection with side WARNING: shields marked to comply with ANSI (PROPOSITION 65) Z87.1. Failure to do so could result in Some dust created by power sanding, sawing, objects being thrown into your eyes and grinding, drilling, and other construction other possible serious injuries.
-
Page 8: Assembly
ASSEMBLY UNPACKING ASSEMBLING THE HANDLE • Carefully remove the product and any Align the holes (4) on the middle handle (2) accessories from the box. Make sure and the lower handle (3). Insert the bolts (5), that all items listed in the packing list are and use the handle knobs (6) to tighten them. - Page 9 ASSEMBLY CHUTE CONTROL INSTALLATION • Position the discharge chute (1) so that it faces forward. NOTE: Align the arrow (2) on the discharge chute with the arrow on the housing. • Firmly push the rod into the keyed hole in the back of the housing until it snaps into place.
- Page 10 ASSEMBLY BATTERY INSTALLATION 1. Open the battery compartment cover (1). 2. Slide the battery (2) down to lock it into position. The battery is fully inserted into the snow thrower when you hear an audible “click”. 3. Close the battery compartment cover (1). BATTERY REMOVAL 1.
-
Page 11: Operation
OPERATION KNOW YOUR SNOW THROWER Read this operator's manual and safety rules before operating your snow thrower. Compare the illustration to your snow thrower in order to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. Handle Bar Bail Switch LED Lights... - Page 12 OPERATION POWERING ON AND OFF UTILIZING THE LED LIGHTS • To power on, first press the safety switch To utilize the LED lights (1) for night time button (1). snow removal, activate the LED light switch (2). • While pressing the safety switch button with one hand, use your other hand to NOTE: After you have finished using your simultaneously pull the bail switch (2)
- Page 13 OPERATION OPERATING TIPS all parts before restarting or operating the snow thrower. Never force controls that have frozen. WARNING: If the Snow Thrower • When working on pebbles, gravel, or hits a foreign object while it is in use, the unpaved surfaces, avoid throwing loose object could be thrown in the direction of the surface material along with the snow by...
-
Page 14: Maintenance
MAINTENANCE SERVICING Servicing should be performed by a qualified technician. Replacement parts for this Snow Thrower must be identical to the parts that they replace. If repairs are necessary, contact the Toll-Free Helpline, at 1-855-378- 6903. NOTE: Identify the left and right sides of the Snow Thrower when standing in the normal operating position. - Page 15 MAINTENANCE DRIVE BELT REPLACEMENT • Ensure that the battery is not installed in the tool. • Remove the 5 screws (1) that secure the left side plate (2) to the frame of the snow thrower. Remove the side cover. • Remove the old belt (3) from the small pulley (5) and large pulley (4).
-
Page 16: Troubleshooting
TROUBLESHOOTING TABLE PROBLEM POSSIBLE CAUSE SOLUTION Make sure the bolts are correctly installed through the handle The bolts are not properly bars. Check to see if the hand The handle is not in position. seated. knobs are tight. Refer to Assembling the Handle section in this manual. -
Page 17: Limited Warranty
N.A., Inc. in materials, parts, or workmanship. 9335 Harris Corners Parkway Charlotte, NC 28269 POULAN PRO, at its own discretion will 1-855-378-6903 repair or replace any and all parts found to be defective, through normal use, free of In Canada, contact: charge to the customer. -
Page 18: Exploded View / Parts List
EXPLODED VIEW / PARTS LIST ITEM NO. PART NO. DESCRIPTION 332041205 Left Side Cover 32205877 Screw 329151205 Belt 311011201AB Bare Tool Assembly 3290135 Split Pin 3220898 Washer 34103486-7 7" Wheel Assembly 332051205 Right Side Cover 3410835-4 Knob 333041205 U Bolt and Knob Assembly 311021201AB Middle Handle Assembly 311031201AB...