IAG -ENG-5001BK Instructions

IAG Engine Oil Cap
Part# IAG-ENG-5001BK / BL / RD / SL
Tools Required: Pick or Small Flat Head Screw Driver
Thank you for choosing IAG Performance. The billet engine
oil cap is designed to be a direct fit on the OE Subaru oil fill
neck. CAD modeled and CNC machined, this piece is
designed to brighten your engine bay. The only assembly
required is removing the inner seal from your stock cap
and re-inserting it into the billet cap. Please follow the
instructions below for an easy installation.
Please follow the instructions below for an easy installation.
1. Use a small pick or flat head screw driver to pry around
the edge of the underside of the stock cap. (Pic#1)
2. Carefully pull the seal out of the stock cap. Note the
orientation of the seal. The flat edge of the seal should
face the cap. (Pic#2-3)
3. Using your hands, carefully press the seal onto the billet
cap. (Pic#4-5)
2.
IAG Performance | 1203 Baltimore Blvd. Westminster, MD 21157 | Ph: 410-840-3555 | www.iagperformance.com
1.
3.
1