Advertisement
IAG TGV / Stock Top Feed Fuel Rails
If you are using the stock fuel rails, use (x1) washer under
each fuel rail mounting point as shown in the corresponding
images 2a, 2b.
2b. Shows the OEM fuel rail to IAG TGV mounting points with (x1) 8mm washers added as a spacer per side. Also illustrates Injector
Dynamic injector fitment.
IAG Performance | 1203 Baltimore Blvd. Westminster, MD 21157 | Ph: 410-840-3555 | www.iagperformance.com
2a. Shows (x2) OEM hex head bolts, placed through the OEM
fuel rail mounting points with (x2) 8mm washers added as
spacers to each side.
3
Advertisement
