Making Calls - BlueTrek Carbon Smart Quick Start Manual

MAKING CALLS

Using the mobile phone key pad
• Make sure the headset is connected with your phone and in stand-by mode.
• Dial the number on the phone keypad, after approximately 2 seconds the audio
connection will be established.
Using the voice recognition function of your mobile phone*
• Make sure the voice recognition function on your mobile is activated and your voice tags
have been recorded on the phone. Please refer to your phone manual.
• When there is no incoming or active call, press on the TALK button for 2 seconds.
• Wait for the audio signal from the mobile phone (generally a short tone).
• Say the name of the person you wish to call.
*This function may not be available on some phones, please check with your phone
manufacturer for further details.
BLUETREK CARBON SMART I 5