BlueTrek Carbon Smart Quick Start Manual page 5

PAIRING
Place the Carbon Smart and your mobile phone within 0.3 meter (1 foot) from each other.
1
Switch on your phone and switch to Bluetooth® discover mode (refer to your phone' s manual).
2
Switch on Carbon Smart, press and hold the TALK Button for approx. 8 seconds until
3
blue and red light flash alternately.
"BLUETREK CARBON SMART" will be displayed on your mobile phone.
4
Follow the phone instructions to accept the pairing. The PIN code (or passkey) is 0000,
5
then press "yes" or "ok".
*If your phone supports Secure Simple Pairing (SSP), PIN code is not required.
For some phones, you may need to select "Connect".
6
* If pairing is successful, the indicator light will switch to blue and flashes intermittently.
2 3 4
BLUETREK CARBON SMART
BLUETREK CARBON SMART
5 6
BLUETREK CARBON SMART
onnec
Connect
onnec
Assign short name
Set as unauthorised
Delete
Select
BLUETREK CARBON SMART I 3
BLUETREK X3 DSP
BLUETREK CARBON SMART
Cancel
Cancel