Making A Call - BlueTrek G2 Manual

3. Wearing Bluetrek
The headset can be used on both ears. Rotate the ear clamp if you want to use it on the other ear.
The ear clamp is made of soft material which can be easily shaped to fit your ear. Make sure the
speaker is properly inserted into your ear.
4. Switching Bluetrek
®
Switching Bluetrek
Press and hold the TALK button for about 2 seconds until the blue indicator light is on. A beep (2
tones) can be heard in the speaker. Release the TALK Button.
If Bluetrek G2 is paired in the Hands Free profile, it will try to connect automatically to the paired
Audio Gateway (e.g. mobile phone).
If Bluetrek G2 is paired in the Headset profile, it will stay in standby mode.
®
Switching Bluetrek
Press and hold the TALK button for about 5 seconds until the red indicator light is on after the quick
blue flashing. A beep (2 tones) can be heard in the speaker. Release the TALK Button.
To save power, the blue indicator light flashes at long intervals. To check if your headset is ON ,
press shortly on the TALK button. If the indicator light is blue, it means your headset in ON.

5. Making a call

The voice recognition (or voice dialling) feature is not available on all mobile phones. However you
can always dial directly on your keypad. If your mobile phone offers the voice recognition feature,
you can make a call directly from the headset without any operation on your mobile phone.
7 l Bluetrek G2 user guide
® G2
®
G2 ON and OFF
G2 ON
G2 OFF