Rock armor front skid plate for 21+ ford bronco (5 pages)
Summary of Contents for IAG IAG-ENG-5014BK
Page 1
L=9” / W=6.875” / H=8.75” Please follow the instructions below for an easy installation. Removal: 1. Using your 10mm wrench, disconnect the negative battery terminal. IAG Performance | 1203 Baltimore Blvd. Westminster, MD 21157 | Ph: 410-840-3555 | www.iagperformance.com...
Page 2
Gently push down on the old j-hooks to dislodge them from the engine bay. Set them aside with your old hardware. IAG Performance | 1203 Baltimore Blvd. Westminster, MD 21157 | Ph: 410-840-3555 | www.iagperformance.com...
Page 3
(on the front side of the battery). Thread a flange nut down several turns. Now push the j-hook down and secure the j-hook into the chassis. Hand tighten the nut. IAG Performance | 1203 Baltimore Blvd. Westminster, MD 21157 | Ph: 410-840-3555 | www.iagperformance.com...
Page 4
Make sure the dimples on the tray are aligned with the corresponding holes in the chassis. Tech Tip 1 IAG Performance | 1203 Baltimore Blvd. Westminster, MD 21157 | Ph: 410-840-3555 | www.iagperformance.com...