Netvue Orb Cam Quick Start Manual page 7

Device added
4.Device added successfully.Return to app
home page，your device should appear in
the list of device.
Device list
1. Use a valid email address to register your
account.
2. Keep the device in a 2.4G WiFi environ
ment with good signal.
3. After connecting to power, the device will
make a "Di" sound for 3 seconds.
Afterwards press the reset button, the
indicator light will then flash rapidly.
4. Strong lights may interfere with the ability
for the device to read the QR code.
5. After connecting to the router, the device
will make a "ding dong" sound effect. After
connecting to the server successfully, it will
play a cheerful chime; if it fails, it will play a
sad sound effect.
6. If the server fails to connect, you may
scan the device ID to connect the device.
Notes