Netvue Orb Cam Quick Start Manual page 11

Manufacturer's Name:
NetVue Technologies Co. Ltd.
Importer:Cédrus Számítástechnikai Kft. Netvue
Orb Cam
Model number: Netvue Orb Cam
Operating Temperature: -20° C to 50° C
This device was tested for typical
body-worn operations. To comply with RF
exposure requirements, a minimum
separation distance of 20cm must be
maintained between the user's body and the
handset, including the antenna.
Third-party belt-clips, holsters, and similar
accessories used by this device should not
contain any metallic components.
accessories that do not meet these requirements
may not comply with RF exposure requirements
and should be avoided. Use only the supplied or
an approved antenna.
This device in compliance with the essential
requirements and other relevant provisions of
Directive 2014/53/EU. All essential radio test
suites have been carried out.
1. Caution : risk of explosion if battery is replaced
by an incorrect type.dispose of used batteries
2. Adapter shall be installed near the equipment
3. The plug considered as disconnect device of
4. The device complies with RF specifica
This product can be used across EU
member states.
Body-worn
WiFi 802.11B/G/N
(HT20,HT40)2.4G.
according to the instructions.
and shall be easily accessible.
adapter.
tions when the device used at 20cm form
your body.
Operation
Function
Frequency
802.11b/g/n(20MHz):
2412~2472MHz；
802.11n(40MHz):
2422~2462MHz；
Max RF
Limit
outputpower
13.9dBm. 20dBm.