Selecting An External Source - Samsung SP-61L3HR Instruction Manual

Special Features

Selecting an External Source

You can use PIP to view a signal from an external source, such as a VCR.
NOTES
• The sub picture doesn't support "ANT 2 IN", "Component1", "Component2", "PC", "DVI" and
"HDMI".
• For more information about external signals, see "Viewing an External Signal Source" (See
page 41). If you select "TV", the sub picture is the same as the main picture.
English - 58
1
Press the MENU button.
Press the ... or † button to
select "Picture", then press
the ENTER button.
2
Press the ... or † button to
select "PIP", then press the
ENTER button.
3
Press the ... or † button to
select "Source", then press
the ENTER button.
If you have not connected
any equipment to the TV's
input jacks, the signal from
these inputs will not appear.
Press the ... or † button to
select an external signal,
then press the ENTER button.
Press the EXIT button to exit.
Picture
Mode : Standard
Input
Color Tone : Warm1
Size : Wide
Picture
Digital NR : Off
Sound DNIe : On
My Color Control
Channel Film Mode : Off
PIP
Setup
Move Enter Return
Picture
Mode : Standard
Input
Color Tone : Warm1
Size : Wide
Picture
Digital NR : Off
Sound DNIe : On
My Color Control
Channel Film Mode : Off
PIP
Setup
Move Enter Return
PIP
PIP : On
Input
Source : TV
TV
AV1
Swap
Picture
AV2
Size
AV3
Position
Sound
S-Video1
Channel : Air 11
S-Video2
Select Sound : Main
Channel
S-Video3
Setup
Move Enter Return
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√
√