Memorizing The Channels - Samsung SP-50L7HR Instruction Manual

Operation

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" (antenna) and
cable channels. After the available channels are memorized, use the CH
scan through the channels. This eliminates the need to change channels by entering the channel
digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing
the channels (automatic) and adding/deleting channels (manual).
English - 26
Selecting the Video Signal Source
Before your TV can begin memorizing the available channels, you
must specify the type of signal source that is connected to the TV
(i.e., an antenna or cable system).
1
Press the MENU button.
Press the ... or † button to
select "Channel", then press
the ENTER button.
2
Press the ... or † button to
select "Air/CATV", then
press the ENTER button.
If you are connected to an
antenna, press the ... or †
button to select "Air".
If you connected cable,
press the ... or † button to
select the type of cable
system: "STD", "HRC" or
"IRC".
Press the EXIT button to exit.
NOTES
• "STD", "HRC" and "IRC" identify various types of cable TV
systems. Contact your local cable company to identify the type
of cable system that exists in your particular area. At this point
the signal source has been selected. Proceed to "Storing
Channels in Memory".
• Subscription cable services require service-specific requirement
for viewing.
and CH buttons to
Channel
Antenna : Ant.1
Input
Air/CATV : Air
Auto Program
Picture
Add/Delete
Sound Favorite Channels
Name
Channel Fine Tune
▼ More
Setup
Move Enter Return
Channel
Antenna : Ant.1 Air
Input
Air/CATV : Air STD
HRC
Auto Program
Picture
IRC
Add/Delete
Favorite Channels
Sound
Name
Channel Fine Tune
▼ More
Setup
Move Enter Return
√
√
√
√
√
√
√