Display; Led Indicators; Setting The Temperature; Thermostat Status (Heat Mode Only) - Danfoss RET M User & Installation Instructions Manual

User Instructions

GB

Display

The LCD displays actual room temperature until the setting dial
is moved.

LED Indicators

Power on - Green (left hand LED).
Thermostat output on - Red (right hand LED).

Setting the temperature

Turn setting dial to required temperature. The selected
temperature will flash in the LCD to signify it is showing set
temperature.
After a short period the display stops flashing and shows actual
room temperature.

Thermostat status (heat mode only)

A flame symbol will be lit whenever the thermostat is calling
for heat.
1