Fixing The Internet Bridge On The Wall; Connecting Rs-485 Cable To The Inter - LG V-net ACS PWFMDB000 Installation & User Manual

Fixing the internet bridge on the wall

Internet bridge can be installed on a wall.
1
Remove the screws on the right side to
open the case of the Internet bridge.
Connecting RS-485 cable to the internet bridge
You need to connect RS-485 cable to the internet bridge.
1
Connect the end of RS-485 cable connected to BUS-A of PI485 to BUS-A part of the internet
bridge.
2
Connect the end of RS-485 cable connected to BUS-B of PI485 to BUS-B part of the internet
bridge.
3
Arrange the cables into A part or B part.
! CAUTION
During the use of B part, foreign objects may enter, so close the hole after arranging the
cable.
INSTALLING THE INTERNET BRIDGE
2
Fix it on the wall using the enclosed screws
on the locations marked in the following fig-
ure.
B
BUS-A
BUS-B
A
13