Table of Contents
Advertisement
Using the earphones
18 | MOMENTUM True Wireless
Displaying the battery charge status using the charging case
If no USB cable is connected to the charging case:
▷ Press the LED button of the charging case.
The LED of the charging case displays the battery charge status
for 5 seconds:
Charging case WITH
LED
earbuds inserted
lights up
... the earbuds are fully
green
charged
pulses
... the earbuds are being
yellow
charged via the
rechargeable battery of
the charging case.
lights up
... the rechargeable battery
yellow
of the charging case is
empty and the earbuds are
not fully charged
lights up
... the rechargeable
red
batteries of the earbuds
and the charging case are
empty
flashes red ... a charging error/battery
error has been detected in
at least one earbud (see
page 20)
Adjusting sound effects/the equalizer
To be able to use the sound effects/equalizer, you require the Smart
Control App (see page 13).
▷ In the Smart Control app, select the desired sound effects via the
equalizer.
The sound effects are stored in the earphones. These sound set-
tings are active even without the Smart Control app, i.e. when you
are using another Bluetooth device.
Setting the voice prompts/beep sounds
To be able to set the voice prompts and beep sounds, you require the
Smart Control app (see page 13).
You can change the language of the voice prompts, choose between
voice prompts and beep sounds, or deactivate the status messages
with a few exceptions (e.g. rechargeable battery is empty).
Storing or transporting the earphones in
Charging case WITHOUT
earbuds
... the charging case is
charged between 50-100
%
–
... the charging case is
charged less than 50 %
... the rechargeable
battery of the charging
case is empty.
... a charging error/
battery error has been
detected in the charging
case (see page 20)
Hide quick links:
Advertisement
Table of Contents
