Remote Control - Samsung HL-S4676S Owner's Instructions Manual

Remote Control

You can use your remote control within a distance of 23 feet and an angle of 30 degrees from the left
and right sides of the TV's remote control receiver. You can also use your remote control to operate your
VCR, Cable box, DVD player and Set-top box. See pages 36~42 for details.
1. POWER
Turns the TV on and off.
2. Channel Number
Press to directly tune to a particular channel.
3. -
Press to select additional channels being
broadcast by the same station. For example,
to select channel "54-3", press "54", then
press "-" and "3".
4. ANTENNA
Press to select "AIR" or "CABLE".
5. CH MGR
Used to display Channel Lists on the screen.
6. VCR/DVD Controls
Controls VCR or DVD functions: Rewind, Stop,
Play/Pause, Fast Forward.
7. VOL +, VOL -
Press to increase or decrease the volume.
8. MUTE
Press to mute the TV sound.
9. MENU
Displays the main on-screen menu.
10. ▲ , ▼ , , , ENTER
œ √
Press to select highlight up, down, left, or
right. While using the on-screen menus,
press ENTER to activate (or change) a
particular item.
11. INFO
Press to display information on the TV
screen.
12. CAPTION
Controls the caption decoder.
13. P.MODE
Adjust the TV picture by selecting one of
the preset factory settings (or select your
personal, customized picture settings.)
(Refer to page 62)
14. S.MODE
Select Sound effect. (Refer to page 77)
15. MTS (Multichannel Television
Stereo)
Press to choose Stereo, Mono or SAP
(Secondary Audio Program).
16. SRS
Activates TruSurround. (Refer to page 83)
17. Mode
(TV/DVD/STB/CABLE/VCR)
Selects a target device to be controlled by
the Samsung remote control (i.e., TV, DVD,
STB, CABLE, or VCR).
18. SOURCE
Press to display all of the available video
sources (TV, AV1, AV2, S-Video1, S-Video2,
Component1, Component2, PC, HDMI1,
and HDMI2).
19. PRE-CH
Tunes to the previous channel.
20. WISELINK
This function enables you to view and play
photo (JPEG) and audio files (MP3) from
an external device. (Refer to pages
116~128)
21. FAV.CH (Favorite Channel)
Press to switch between your favorite
channels.
22. CH /
Press to change channels.
23. EXIT
Press to exit the menu.
24. SLEEP
Press to select a preset time interval for
automatic shut off.
(Refer to page 46)
25. P.SIZE
Press to change the screen size.
(Refer to page 65)
26. STILL
Press to pause the current screen.
(Refer to page 72)
27. RESET
If your remote control is not functioning
properly, take out the batteries and press
the reset button for about 2~3 seconds.
Re-insert the batteries and try using the
remote control again.
28. SET
Used during set up of this remote control,
so that it will work compatibly with other
devices (Set-top box, VCR, Cable box,
DVD, etc.)
NOTES
• The Color buttons are used
during the channel list
function. (Refer to pages
50~55)
• This is a special remote
control for the visually
impaired, and has Braille
points on the POWER, VOL
+, VOL -, CH /
and PLAY/PAUSE buttons.
• The performance of the
remote control may be
affected by bright light.
English - 13
, STOP,