The D-Net Control Panel - Samsung HL-R5688W Owner's Instructions Manual

Using the D-Net

The D-Net control panel

Select an IEEE1394 from the D-Net device list. The TV will then display the D-Net control panel.
This panel allows you to use the TV remote control to control the selected IEEE1394 device.
Press the D-Net button on the remote control.
1
Press the ... or † button to select a
2
D-Net (IEEE1394) connected device.
Press the ENTER button.
• The D-Net control panel appears on the
bottom of the screen.
Use the ..., †, œ, √ buttons on the remote
3
control to move through the options (see next
page) available in the D-Net control panel.
Press the ENTER button to select an option.
4
To view the IEEE1394 device in FULL SCREEN,
5
press the EXIT button on the remote control.
• To exit D-Net mode, select DTV from the
D-Net device list or press the SOURCE
button on the remote control.
NOTE
• For information about how to use the icons, refer to the following page.
English - 118
Copy-free
Copy-free