The D-Net Control Panel - Samsung HL-R4667W Owner's Instructions Manual

Using the D-Net

The D-Net control panel

Select an IEEE1394 from the D-Net device list. The TV will then display the D-Net control panel.
This panel allows you to use the TV remote control to control the selected IEEE1394 device.
Press the D-Net button on the remote control.
1
Press the ... or † button to select a
2
D-Net (IEEE1394) connected device.
Press the ENTER button.
• The D-Net control panel appears on the
bottom of the screen.
Use the ..., †, œ, √ buttons on the remote
3
control to move through the options (see next
page) available in the D-Net control panel.
Press the ENTER button to select an option.
4
To view the IEEE1394 device in FULL SCREEN,
5
press the EXIT button on the remote control.
• To exit D-Net mode, select DTV from the
D-Net device list or press the SOURCE
button on the remote control.
Copy information
Message
Copy_free
No_more_copies
Copy_one_generation
Copy_never
English - 112
Descriptions
Able to copy.
Unable to copy anymore.
Able to copy once.
Unable to copy.
Copy-free
Copy-free