Rear Panel Jacks - Samsung HL-R5668W Owner's Instructions Manual

Your New Wide TV

Rear Panel Jacks

ΠANTENNA terminals
Two independent cables or antennas can be connected to
these terminals. Use "ANT 1 IN (CABLE)" and "ANT 2 IN (AIR)"
terminals to receive a signal from VHF/UHF antennas or your
cable system. (Refer to pages 18~19)
´ S-VIDEO INPUT jacks
Connects an S-Video signal from an S-VHS VCR or DVD player.
(Refer to pages 20 and 22)
ˇ VIDEO/AUDIO INPUT jacks
Connect video/audio signals from external sources, such as VCR
or DVD players. (Refer to page 23)
¨ VIDEO/AUDIO OUTPUT jacks
Sends video/audio signals from the TV to an external source,
such as a VCR. These jacks are available only in RF, Video and
S-Video modes.
ˆ COMPONENT1, 2 jacks (Y, P
Use these jacks to connect the component video/audio signals
from a DVD player or a Set-Top Box. (Refer to pages 23~24)
Ø SUB-WOOFER OUT jack
Connect to an active SUB-WOOFER. (Refer to page 27)
∏ PC AUDIO INPUT jacks
Connect these to the audio output jacks on your PC. (Refer to
page 128)
" HDMI 2/DVI IN (AUDIO L/R)
Connect to the DVI audio output jack of an external device.
' Anynet
This jack is for connecting to other Samsung Anynet-enabled
devices. Please refer to the Anynet Owner's Instruction.
˝ RS232C
Connect to a computer for reading and loading data information.
English - 14
Ô DIGITAL AUDIO OUT (OPTICAL) jack
 PC VIDEO INPUT jack
Ò HDMI (High Definition Multimedia Interface)/
Ú HDMI (High Definition Multimedia Interface)
, P , AUDIO L/R)
B R
Æ D-Net (IEEE1394) S400 MPEG
ı SERVICE
˜ CableCARD
¯ G-LINK
Connect to a Digital Audio Component. (Refer to page 26)
Connect these to the video output jack on your PC.
DVI INPUT jack (HDMI IN 2/DVI IN)
Connect to the HDMI jack of a device with HDMI output.
These inputs can also be used as a DVI connection with separate
analog audio inputs. An optional HDMI/DVI cable will be
necessary to make this connection. When using the optional
HDMI/DVI adapter, the DVI analog audio inputs on your TV allow
you to receive left and right audio from your DVI device. (Not
compatible with PC) (Refer to pages 24~25)
INPUT jacks (HDMI IN 1)
Connect to the HDMI jack of a device with HDMI output.
(Not compatible with PC)
Connect to external IEEE1394 digital products such as digital
VCRs and camcorders. Two jacks are provided for this purpose,
which allow for a high degree of flexibility for connecting your
D-Net controlled system. (Refer to pages 112~126)
This jack is for software upgrades.
TM
Insert the CableCARD into the slot. (Refer to page 21)
TM
Connect the IR controller cable to the G-LINK
(Refer to page 104)
terminal on your TV.
TM