Download Print this page

Technical Features; Mechanical Installation - Novus TagTemp-S Instruction Manual

Hide thumbs Also See for TagTemp-S:

Advertisement

1
INTRODUCTION
TagTemp-S is an electronic temperature data logger. The
temperature measured by the sensor is recorded in device internal
memory. This data is transferred through a smartphone equipped
with an embedded NFC interface or by an NFC interface connected
to a computer through an USB port (both not included).
LogChart-NFC application for ANDROID™ and the NXperience for
Windows® are the tools used to configure the operating mode,
transfer and display data. The acquisition start and end parameters,
logging interval, setpoint alarms and other parameters can be easily
defined using these applications.
The operating manual and NXperience can be downloaded from
the manufacturer's website. The ANDROID™ LogChart-NFC app
can be downloaded from Google Play Store.
2

MECHANICAL INSTALLATION

TagTemp-S can be installed using a double-sided adhesive tape on
the back of the device, taking care not to stick it over the
identification tag. Another way is to use the blister hole to attach the
transmitter.
NOVUS AUTOMATION
3

TECHNICAL FEATURES

Operating
-30 °C to 60 °C.
Temperature
Storage
From -30 °C to 65 °C.
Temperature
Measuring Range
Temperature: -30.0 °C to +60.0 °C.
±1 °C max. over the full measuring range.
Note:
Accuracy of
measurement error in the "Offset"
Measurement
parameter
software.
Measurement
Temperature: 0.1 °C / 0.1 °F.
Resolution
Memory Capacity
4020 registers.
1 minute min.
Interval between
Measurements
4 hours max. (240 minutes).
3.0 V lithium battery (CR2032), built-in,
Power Supply
non-replaceable.
Battery Life
Above 2 years at a 5-minute acquisition
(estimated)
interval.
Dimensions
37 x 57 x 8 mm.
RF Interface
ISO 15693 (NFC-V) compatible.
Data Transfer Time
Approx. 20 seconds (depends on the
between Register
smartphone processing speed).
and Smartphone
ANDROID™ version: 4.0 or above.
LogChart-NFC
Application
Languages: Portuguese or English.
USB
NFC interface for
compatible
the computer
Windows®.
Case
Polyvinyl Chloride (PVC).
All electronics are protected by the
Degree of protection
housing. IP65 compatible.
Certification
CE
TagTemp-S
The
user
can
correct
the
using
the
configuration
to
NFC
interface
(optional),
NXperience
with
for
2/12

Advertisement

loading
Need help?

Need help?

Do you have a question about the TagTemp-S and is the answer not in the manual?