Viewing An External Signal Source; Viewing Position; Setting The Signal Source - Samsung HL-P4667W Quick Setup Manual

Viewing an External Signal Source

Use the remote control to switch between viewing signals from connected equipment,
such as a VCR, DVD, Set-Top box or the TV source (broadcast or cable).

Setting the Signal Source

1
Press the MENU button. Press the
ENTER button to select "Input".
Input Source List
Edit Name
Picture
Anynet
Sound
Channel
Setup
Guide
Move
Alternate method
Press the SOURCE button on the remote
control repeatedly to select an external signal
source.

Viewing Position

To optimize your viewing comfort, please follow the guidelines below for viewing distance.
If viewing for an extended period of time, sit as far back from the screen as possible.
Input
√
: TV
√
Enter Return
2
Press the ENTER button to select
"Source List". Press the
select a signal source, then press the
ENTER button.
TV
Input
AV1
Picture
AV2
Sound
AV3
S-Video1
Channel
S-Video2
Setup
▼ More
Guide
Move
• When you connect equipment to the TV,
you can choose between the following
sets of jacks: "AV1", "AV2", "S-Video1",
"S-Video2", "Component1",
"Component2" or "HDMI/DVI" on the
TV's rear panel and "AV3" or "S-Video3"
on the TV's side panel.
• HDMI input can be selected only when
the external device is turned on and
connected to the TV.
AV1
13
or button to
... †
Source List
---
---
---
---
---
Enter Return