Viewing An External Signal Source; Setting The Signal Source - Samsung HC-R4741W Owner's Instructions Manual

O
P E R AT I O N

Viewing an External Signal Source

Use the remote control to switch between viewing signals from connected equipment, such as
VCR, DVD, Set-Top box and the TV source (broadcast or cable).

Setting the Signal Source

1
Press the MENU button.
Press the ENTER button to select
"Input".
2
Press the ENTER button to select
"Source List".
Press the ... or † button to select a
signal source, then press the ENTER
button.
Press the EXIT button to exit.
Alternate method:
Press the SOURCE button on the
remote control repeatedly to select
an external signal source.
TV Input
Source List
Edit Name
Move Enter Return
TV Source List
TV
AV1 - - - - -
AV2 - - - - -
AV3 - - - - -
S-Video - - - - -
Component1 - - - - -
Component2 - - - - -
Move Enter Return
AV1
English - 39
√
√
œ When you connect equipment
to the TV , you can choose
between the following sets of
jacks : "AV3", "S-Video" on
the TV' s side panel or "AV1",
"AV2", "Component1" or
"Component2" on the TV' s
rear panel.