How To Use Control Panel - Hitachi R-WB460PY Instruction Manual

How to use Control Panel (Continuation)
Other Functions (You can do the following)
"Energy Saving"
Recommened to use this function in case of low storage volume, or a long vacation when the doors are not opened for long time.
1. Press "Energy Saving" button. (Starts operation.) 2. When you wish to stop this function, press the button again.
* A 4
Energy
Saving
jS)
The lamp
The lamp light is off
> In case the compartment temperature rises, the operation will be back to a normal setting temporarily.
> After a long time operation of "Energy Saving", in some cases, fatty ice cream, etc, may become soft.
Please stop "Energy Saving" operation in this case.
"Child Lock"
You can prevent mischief of all the buttons on the control panel by children.
1. Press "Child Lock" button for 5 secondsfto lock). 2. To stop this function, press 5 seconds "Child Lock" again.
* A
A
thiljU-Oof {fPeePlJ , - K .
Press5Se<x . « 3 ^ ^ O
Lamp light is on Lamp light is off
• When "Child Lock" is activated, other buttons functions will not be activated even if you press.
juick Freezing'
"Quick Freezing"
When you wish to store frozen food at a lower temperature than usual, use this button
How to Start
1. Press "Quick Freezing"
button, and start
operation of
"Quick Freezing",
A. A
A
[ F r e e z m g J k J ^
2. Press again "Quick Freezing,
_y and stop the operation,
"Quick Freezing" lamp light is on.
After approx. 2 hours,
"Quick Freezing" operation
will be finished automatically.
Quick
Freezing
| "Quick Freezing" lamp light is off. |
Lamp light is off.
"Quick Freezing"
> During "Quick Freezing", priority cooling of the freezer compartment will be done. Thus, try to avoid unnecessary opening
and closing the doors to avoid temperature rise in the refrigerator compartment.
> After "Quick Freezing" is automatically finished and if the button is pressed again, the lamp will turn on, however, the next
"Quick Freezing" operation will not start. After 60 minutes, the operation will start again.
> During defrosting period, even if "Quick Freezing" lamp is on, no operation will be made. After finishing the defrosting operation,
"Quick Freezing" will automatically start.