External Control Panel - LG RD-JT20 XGA User Manual

Table of Contents

Advertisement

External Control Panel

- Keystone / Left
Menu
The Infrared Remote Receiver (Front and Rear) allows the projector to
accept signals from the remote control. For best results, be sure to aim the
control toward the sensor without any obstructions between the two, and at a
distance no greater than 6 meters.
Menu will display the menu system on screen. Press Menu again to access the
sub-menus. Left and Right help you navigate among choices and settings in
the menus and sub-menus. However, when the onscreen menu is not
activated, the Left and Right buttons will function as Keystone +/- hot keys.
Press the Exit button to go back to the main menu. Press Exit again to leave
the menu system.
The Status Indicator will blink or light up when the lamp needs service, cooling
or replacement. See "Lamp Information" on page 19. for more detailed
information.
When the projector is on, back-lit Power will blink during warm-up and turn to
solid green to indicate the projector is ready for use.
Press Power for 1 second to turn the projector on or off.
Auto key: Automatically sense the best picture quality for current received
signals.
Source key: Select signal sources, PC, Video, S-video and YPbPr.
Exit
KEY
-
STONE
AUTO
SOURCE
Lamp status indicator
DLP Personal Projector
EXIT
KEY
Keystone +/ Right
+
STONE
MENU
POWER
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rd-jt21 svga

Table of Contents