Using Additional Options; Adjusting Aspect Ratio - LG 22LS2100 Owner's Manual

Using additional options

Adjusting aspect ratio

Resize the image to view the image at its optimal
size by pressing ARC while you are watching TV.
CAUTION
y If a fixed image displays on the screen for a
y
long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is "image burn" or "burn-in" and
not covered by the warranty.
y If the aspect ratio is set to 4:3 for a long
y
period of time, image burn may occur on the
letterboxed area of the screen.
- 16:9: The following selection will allow you
to adjust the picture horizontally, in linear
proportion, to fill the entire screen(useful for
viewing 4:3 formatted DVDs).
- Just Scan: Following Selection will lead to you
view the picture of best quality without loss of
original picture in high resolution image.
Note : If there is noise in original Picture, You
can see the noise at the edge.
Just Scan
- Original: When your TV receives a wide screen
signal it will automatically change to the picture
format broadcast.
Original
- 4:3: The following selection will allow you to view
a picture with an original 4:3 aspect ratio, gray
bars will appear on both the left and right of the
screen.
- 14:9: You can view a picture format of 14:9 or a
general TV programme in the 14:9 mode. The
14:9 screen is viewed in the same way as in 4:3,
but is magnified to the left and right.
- Zoom 1 & 2: The following selection will allow
you to view the picture without any alteration,
while filling the entire screen. However, the top
and bottom of the picture will be cropped.
NOTE
y You can only select 4:3, 16:9 (Wide) in RGB
y
mode.
y You can only select 16:9 (Wide), Just Scan,
y
4:3 in HDMI mode.
y In HDMI (over 720p) mode, Just Scan is
y
available.
y You can only select 16:9 (Wide), Original,
y
4:3, 14:9, Zoom1/2 in AV mode.
23
WATCHING TV