Using Additional Options; Adjusting Aspect Ratio; Using The Input List - LG M2241A-PM.AWH Owner's Manual

Using additional options

Adjusting aspect ratio

Resize the image to view the image at its optimal
size by pressing ARC while you are watching TV.
CAUTION
If a fixed image displays on the screen for
y
a long period of time, it will be imprinted
and become a permanent disfigurement on
the screen. This is "image burn" or "burn-
in" and not covered by the warranty.
If the aspect ratio is set to 4:3 for a long
y
period of time, image burn may occur on
the letterboxed area of the screen.
- 16:9: The following selection will allow you
to adjust the picture horizontally, in linear
proportion, to fill the entire screen.
- Just Scan: Following Selection will lead you to
view the picture of best quality without loss of
original picture in high resolution image.
Note : If there is noise in original Picture, You
can see the noise at the edge.
Just Scan
- 4:3: The following selection will allow you to
view a picture with an original 4:3 aspect ratio,
black bars will appear on both the left and right
of the screen.
- Zoom 1 & 2: The following selection will allow
you to view the picture without any alteration,
while filling the entire screen. However, the top
and bottom of the picture will be cropped.
NOTE
You can only select 4:3, 16:9 (Wide) in RGB
y
mode.
You can only select 4:3, 16:9 (Wide) in
y
HDMI mode.
In HDMI (over 720p) mode, Just Scan is
y
available.
You can only select 4:3, 16:9 (Wide),
y
Zoom1/2 in TV and AV mode.

Using the input list

Selecting an input source
1
INPUT
Press to access the input source list.
2
Press the Navigation buttons to scroll to one of
the input sources and press ENTER.
Input source
Antenna
Watch TV over the air and cable
AV Watch the contents in a VCR or
other external devices
RGB View a PC display on the screen
HDMI
Watch contents in a DVD or Digital
settop box or other high definition
devices
15
WATCHING TV
Description