Legend & Abbreviations - Solidremote 202U Instructions

settings by using PRG2
PRG2 & DIP Switches 1.2.3
Our timed output mode supports count down timing in 1~60 seconds as well as 1~60 minutes. (NOT continuous, only preset timer values in
the range is available). See the lookup table below for all available values and their settings.
D1 = DIP Switch 1
D2 = DIP Switch 2
D3 = DIP Switch 3
D1 ___ D2 ___ This setting is changed
D1 ___ D2 ___ DIP position is in normal working
___ This is RELAY 1 timing value
___ This is RELAY 2 timing value
D1 / D2
OFF OFF
D1 / D2
ON OFF
D1 / D2
OFF ON
D1 / D2
ON ON
D3
ON
D3
OFF
For example,
If you need a timed output of 31 seconds (relay turn on for 31 seconds then auto turn off)
 set DIP 1 , DIP 2
OFF ON

set DIP 1 , DIP 2
OFF OFF
If you need a timed ouput of 52 minutes (relay turn on for 52 minutes then auto turn off)
 set DIP 1 , DIP 2
ON ON

set DIP 1 , DIP 2
ON OFF
✔
Information: Timed output mode is entered by DIP Switch 3 in ON position, in normal working mode after boot.
Disclaimer: The timer accuracy depends on factors such as temperature etc, it should be in
-4°F to 131°F temp. (+/-0.3% range
It should be good enough for common purpose, but NOT SUITABLE for applications that requires very precise timing
control.
ALWAYS post a new topic in forum & double check email for prompt response, thanks.
These settings enables you to select one specific timing you want in timed output mode
during boot period
after boot
The timed output value  DIP switches position lookup table
D1 / D2
OFF
1
16

31
46

, DIP 3 during boot (see Page 3 - Settings – How to change them?)
OFF
, DIP 3 after boot, then activate relay #1
ON
, DIP 3 during boot (see Page 3 - Settings – How to change them?)
ON
, DIP 3 after boot, then activate relay #2
ON
under 77°F room temperature)
Visit solidremote.help if you need help
PRG2 controls timer & timer only
Legend & abbreviations
D1 / D2
OFF ON OFF
3 5 7
18 20 22
33 35 37
48 50 52
↓
Above value are in minutes
Above value are in seconds
* Characterized value only, NOT tested in production.
D1 / D2 D1
OFF ON ON
9 11 13
24 26 28
39 41 43
54 56 58
-0.6% ~ +1.0% range
--- Page
/ D2
ON
15
30
45
60
under
5