Samsung SRP-250 Series Operator's Manual page 27

DLE ENQ n
[Name]
[Format]
[Range]
[Description]
This command is available only with a serial interface, and is ignored with
a parallel interface.
ESC SP n
[Name]
[Format]
[Range]
[Description]
ESC ! n
[Name]
[Format]
[Range]
[Description]
Bit Off/On Hex
0 Off 00
On 01
1,2 - -
3 Off 00
On 08
4 Off 00
On 10
5 Off 00
On 20
6 - -
7 Off 00
On 80
Determine the values of n by adding the value of all the characteristics
you want to select.
Real-time request to printer.
ASCII DLE
Hex 10
Decimal 16
1 n 2
Recovers from an error after clearing the receive and
print buffers.
Set right-side character spacing.
ASCII ESC
Hex 1B
Decimal 27
0 n 255
Sets the character spacing for the right side of the character
to n/160 inches.
Select print mode(s).
ASCII ESC
Hex 1B
Decimal 27
0 n 255
Selects print mode(s) using n as follows.
Decimal Function
0 Character font(9
1
Character font(9
- Undefined.
0 Emphasized mode not selected.
8 Emphasized mode selected.
0 Double-height mode not selected.
16 Double-height mode selected.
0 Double-width mode not selected.
32 Double-width mode selected.
- Undefined.
0 Underline mode not selected.
128 Underline mode selected.
26
ENQ n
05 n
5 n
SP n
20 n
32 n
! n
21 n
33 n
9) selected.
7) selected.