Samsung SRP-250 Series Operator's Manual page 25

DLE EOT n
[Name]
[Format]
[Range]
[Description]
n = 1 : Printer status
Bit Off/On Hex
0 Off 00
1 On 02
2 Off 00
On 04
3 Off 00
On 08
4 On 10
5 Off 00
On 20
6 - -
7 Off 00
n = 2 : Off-line status
Bit Off/On Hex
0 Off 00
1 On 02
2 - -
3 Off 00
On 08
4 On 10
5 Off 00
On 20
6 Off 00
On 40
7 Off 00
Real-time status transmission.
ASCII DLE
Hex 10
Decimal 16
1 n 4
Transmits the selected printer status specified by n
in real time, according to the following parameters:
n = 1 : Transmit printer status.
n = 2 : Transmit off-line status.
n = 3 : Transmit error status.
n = 4 : Transmit paper roll sensor status.
Decimal Function
0 Not used. Fixed to Off.
2 Not used. Fixed to On.
0 Drawer open/close signal is LOW
(connector pin 3).
4 Drawer open/close signal is HIGH
(connector pin 3).
0 On-Line.
8 Off-Line.
16 Not used. Fixed to On.
0 Not waiting for on-line recovery.
32 Waiting for on-line recovery.
- Undefined.
0 Not used. Fixed to Off.
Decimal Function
0 Not used. Fixed to Off.
2 Not used. Fixed to On.
- Undefined.
0 Paper is not being fed by using the PAPER
FEED button.
8 Paper is being fed by the PAPER FEED
button.
16 Not used. Fixed to On.
0 No paper-end stop.
32 Printing stops due to paper end.
00 No error.
64 Error occurs.
00 Not used. Fixed to Off.
24
EOT n
04 n
4 n