Installation Instructions; Unpacking Refrigerator - Haier HA10TG21SW User Manual

INSTALLATION INSTRUCTIONS

UNPACKING REFRIGERATOR

Do not puncture refrigerant tubing.
Follow handling instructions carefully.
Flammable refrigerant used.
Failure to do so can result in death, explosion or fire.
IMPORTANT: Handle with care when moving refrigerator to avoid either
damaging the refrigerant tubing or increasing the risk of a leak.
IMPORTANT: When moving the refrigerator, never tilt it more than a 45°
angle. This could damage the compressor and the sealed system. If the
refrigerator has been placed in a horizontal position for any period of time,
wait 24 hours before plugging in the refrigerator to allow the refrigerant to
settle.
1. Remove all packaging material. This includes the corrugated base and all
adhesive tape holding the refrigerator accessories inside and outside.
2. Inspect and remove any remains of packing, tape or printed materials
before powering on the refrigerator.
3. If your refrigerator comes with smooth or stainless steel doors, please
remove the clear film before turning it on for the first time. When
removing the film, do not pull the film straight down as this could result in
misaligned doors.
4. It is normal for the freezer door to be positioned slightly higher than the
top of the cabinet when the refrigerator is first installed. This positioning
is done at the factory to ensure a proper gasket seal once the door is
weighted with food items.
49-60796-1
WARNING
Explosion and Fire Hazard
9