Guidelines For Using Paper - Samsung ML-1615 User Manual

Guidelines for Using Paper

For the best result, use conventional 75 g/m
Ensure that the paper is of good quality, and free of cuts, nicks,
tears, spots, loose particles, dust, wrinkles, voids, and curled or
bent edges.
If you are unsure of what type of paper you are loading (such
as, bond or recycled), check the label on the package.
The following problems may cause print quality deviations,
jamming or even damage to the printer.
Symptom
Poor print quality
or toner adhesion,
problems with
feeding
Dropout,
jamming, curl
Increased gray
background
shading/printer
wear
Excessive curl
problems with
feeding
Jamming, damage
to printer
Problems with
feeding
Notes:
• Do not use letterhead paper printed with low-temperature inks,
such as those used in some types of thermography.
• Do not use raised or embossed letterhead.
• The printer uses heat and pressure to fuse toner to the paper.
Ensure that any colored paper or preprinted forms use inks that
are compatible with this fusing temperature (180 °C or 372 °F
for 0.1 second).
Problem with
Paper
Too moist, too Try another kind of
rough, too smooth paper, between 100 ~
or embossed; 250 Sheffield, 4 ~ 5 %
faulty paper lot moisture content.
Store paper flat in its
Stored improperly moisture-proof
wrapping.
Use lighter paper, open
Too heavy
the rear output tray.
Too moist, wrong
• Open the rear output
grain direction or
short-grain
• Use long-grain paper.
construction
Cutouts or Do not use paper with
perforations cutouts or perforations.
Ragged edges Use good quality paper.
(20 lb) paper.
2
Solution
tray.
S 6.5
PECIFICATIONS
6