Fill Cell; Zero Meter; Test Methods - eXact iDip Quick Start Manual

8 SELECT, FILL, DIp, READ
Rinse the cell 3 times with the water sample to be
6
fiLL
tested and to the top to begin test.
7
Press and the iDip
meter is ready to test. For Standard Liquid Method, place
Cell Cover on CELL before zeroing.
Standard Strip Method Tests (count-up if required):
• Alkalinity, Total • Hydrogen Peroxide - Mid (100 sec)
• Bromide (as NaBr) • Hydrogen Peroxide - High
• Bromine • Iodine
• Calcium (as CaCO ) • Magnesium Hardness
3
• Chloride (as NaCl) • Nitrate (as NO
• Chlorine Dioxide • Nitrite (as NO
• Chlorine, Free • Ozone
• Chlorine, Total • Peracetic Acid
• Chlorine, Total - High (120 sec) • Permanganate
• Chromium (VI) (240 sec) • pH
• Copper (120 sec) • Phosphate (120 sec)
• Hardness, Total - Low • Sulfate
• Hardness, Total - High • Sulfide
• Hydrogen Peroxide - Low (120 sec)
Standard Liquid Method Tests (# of drops / count-up if required):
• Cyanuric Acid (5 drops / 60 sec)
For non-standard test methods and detailed test instructions visit
www.sensafe.com/idip/.
®
display reads 0 indicating the
PPM
) (600 sec)
3
) (360 sec)
2
• Metals (2 drops / 120 sec)